The North American lubricants market historically has been dominated by the volumes and technical advances originating from the United States. The North American picture usually includes Canada, too, due to its cold climate and similar demands for lubricant performance. For decades, Canada has been a major automobile producer with similar technical requirements to the United States.
Mexico however, though part of the same geographic region, has historically been considered separately as a lubricants market. Its warm climate and lack of industrial development relegated it to a secondary position when considering performance trends and their impact on base stock and additive selection.
That changed with the ratification of the North American Free Trade Agreement (NAFTA) in 1994. The subsequent 10 years saw a significant shift of auto manufacturing from the United States and Canada to Mexico.
Today, Mexicos annual demand for lubricants approaches 700,000 metric tons. It buys more base oil and lubricants from the United States than does Canada, according to the U.S. Energy Information Administration.
Mexico is no longer an industrial backwater, either. The country is a leading producer of passenger cars with some 42 automakers having a presence, representing North American, European and Asian makes. This has significantly boosted the Mexican economy and expanded the need for technical advances in automotive lubricants.
Mexico produced an estimated 2.3 million cars in 2011, topping the previous high in 2008. Mexican car production is forecasted to reach 3.5 million units by 2017. As auto companies continue to focus on fuel efficiency, Mexico, with its lower-cost labor force, is well positioned to produce smaller vehicles for these markets.
Roughly 80 to 85 percent of Mexicos car production is exported, with the United States its largest customer. Not surprising, Mexican car production surpassed Canada in 2011. Mexicos top automakers, ranked by sales, are General Motors, Volkswagen, Nissan, Ford, Fiat, Chrysler, Toyota, Honda and others. A new Mazda plant is scheduled to begin production in 2013, increasing automobile exports by 100,000 units. Honda has also announced a new plant (its third in Mexico) to produce 200,000 units by 2014.
Mexico is also a major producer of trucks and buses. Truck production reached 136,678 units in 2011 according to statistics from the Mexican government. Global manufacturers include Mercedes Benz/Detroit Diesel, Navistar/International, Kenworth, Ford, GM, VW, Volvo, Scania, Man, Isuzu and Hino Dina.
Mexicos growing automotive industry is boosting the demand for top-tier and lower-viscosity engine oils that meet global OEM requirements. The result has been a dramatic change in the way lubricants are formulated. For example, theres increasing demand for lubricants meeting European ACEA and OEM standards, as well as GMs proprietary Dexos1 specification; these present more stringent volatility requirements than observed in the United States and Canada.
Despite its growing appetite for top-tier lubricants, Mexico still sees significant demand for monograde and lower-performance lubricants. There exists a wide range of quality offerings within the region and accordingly a prolific number of finished lubricant suppliers.
Leading local blenders include Raloy Lubricants, Commercial Roshfrans, Lubral, Bardahl and Mexicana de Lubricantes. Together, they hold almost 50 percent of the countrys lubricant market. Major multinational oil companies like ExxonMobil, Shell (including Pennzoil and Quaker State), BP Castrol and Chevron share approximately 46 percent, while the remainder is associated with a large number of smaller independent oil blenders, estimated to be as many as 200.
Only a small fraction of Mexican blenders (20 percent) formulate to todays ILSAC GF-5, API SN or European engine oil requirements. This disparity creates problems with quality, consistency and policing of engine oils.
In the past, Mexicos lubricant blenders could satisfy their demands using domestic base stocks produced by Petroleos de Mexico (Pemex, the national oil company). Pemex operates a 6,000 barrel per day API Group I plant in Salamanca, but now represents only one-third of total base oil supply. The facility has not been modernized or upgraded, therefore Pemex Group I base stocks are not suitable for formulating high-performance engine oils.
This has led Mexican blenders to seek alternative supply through imports. Currently, the primary supply source of base stocks for Mexico is U.S. Gulf Coast refineries and supply points, though not all majors export to the region. Imports include Group II from North America, and Group III originating from Asia (e.g. S-Oil, SK Lubricants) or Europe (e.g. Neste Oil) by way of the U.S. Gulf Coast. Group I is imported to balance the Mexican Group I demand, and some naphthenics also come ashore.
Overall base stock demand in Mexico was estimated at 655,000 metric tons in 2011, consistent with the pre-recession peak of 2007. The market is seeing increasing demand for Group II base stocks for its heavy-duty needs, and Group III for passenger car lubricants. Annual demand growth is forecast at 2 to 3 percent for the immediate future as Mexico continues to welcome new investment in manufacturing facilities.
Supply-chain options have also expanded for lubricant companies operating in Mexico. Until recently, the low-volume demand for Group II and III meant that base stocks moved into Mexico by tank truck or iso-tank. But with increasing demand, the mode of transportation has also expanded, and now includes truck and rail.
Major supply points include Mexico City, Salamanca, Guadalajara and Monterey. There is the option to import larger cargoes into deepwater ports such as Veracruz, Altamira, or Brownsville, Texas. However, logistical considerations can become quite complex with this option. Therefore, unless there is sufficient demand by single or multiple blenders, this option is generally a secondary consideration.
Rail traffic into Mexico is an excellent option, as the rail system is very good, safe and supported by major U.S. companies. A good example is Kansas City Southern; Kansas City Southern de Mexico serves northeastern and central Mexico and the port cities of Lazaro Cardenas, Tampico and Veracruz.
With a good rail system, the next step is to establish terminals where base stocks can be collected and dispatched to the local markets. One such investment was recently made in Toluca, where Raloy Lubricants commissioned a new terminal that can be supplied by rail or truck. The New Diamond Terminal has the capacity to handle 400 rail cars and 27,000 metric tons of products annually.
Diamond International, the operator of this new terminal, will support Raloys lubricant blending in nearby Santiago, and provide a distribution point for base stocks and other materials to the smaller blenders and industrial customers in the region. Kansas City Southern de Mexico helped to develop the project by taking advantage of unused real estate and rail facilities in the area. The terminal has room to grow and additional tankage beyond the current capacity of 900,000 gallons is part of the long-term plan for the facility.
As the lubricants industry in Mexico continues to grow, the dependence on local base stock supply will decline. This will provide the opportunity for further investment to support the import of high-quality base stocks into the region. The Toluca investment is an indication of the commitment by the Mexican lubricants industry to meet the growing technical and volumetric needs of the region.