China 6 Standards Change Vehicle Landscape

Share

SINGAPORE – The introduction of the China 6 emission standard in 2020 is expected to push lubricant formulations to cater to a diverse range of engines, industry experts said at a conference here recently.

This is stricter than Euro 6 and will be implemented in two phases, China 6a in 2020 and China 6b in 2023, said Robin Wong, marketing manager in China for Lubrizol, at the ICIS Asian Base Oil & Lubricants Conference June 27. This is a significant challenge to [original equipment manufacturers]. New emission regulations and fuel efficiency standards will continue to drive change.

Last year, most OEMs failed the corporate-average fuel consumption limit of 6.4 liters per 100 kilometers. So OEMs need very low viscosity [engine oils] or electric vehicles to meet these new regulations he said.

For passenger cars, China 6 may lead to widespread use of gasoline particulate filters and both engine and driveline fluids are expected to shift to lighter viscosity grades and lower [sulfated ash, phosphorous and sulfur] lubricants, he said.

In addition, CAFC Phase IV requires annual improvements in fuel consumption to 5 liters/100 km by 2020.

OEMs pushing for longer drain intervals of 100,000 kilometers is expected, but for rural areas high sulfur fuel is still being provided by local producers, said Wang.

For commercial vehicles, there will be an increase in usage of diesel particulate filters, and regulations will require a 15 percent reduction in fuel consumption from 2020 to 2021.

However, by 2020, the majority of new engine production will still be turbocharged gas direct injection, and lubricants for TGDI will increase, he said.

According to Wang, more complex after treatment systems will be needed to meet China 6 regulations, and most local OEMs will use exhaust gas recirculation to ensure nitrogen oxide compliance, although Cummins just introduced a non-EGR engine for China 6b in a Integer Emission Summit in June 6.

At the same time, Chinese OEMs are also adopting natural gas for long and short haul applications. This means simpler aftertreatment systems.

Natural gas engine demand is increasing, and there is a growing need for high performance mobile natural gas engine oils, Gary Parsons, global OEM and industry liaison manager for Chevron Oronite, said at the conference.

Natural gas pipeline infrastructure is already in place. Unlike India, where the pipeline network may double to 30,000 km in the next few years, Chinas total natural gas pipeline length is already more than 85,000 km. The country had about 3,000 LNG stations as of the end of 2017 and plans to build 15,000 natural gas stations by 2020 – 10,000 compressed natural gas and 5,000 liquid natural gas stations – according to Parsons.

China has been tweaking policies to control emissions and develop the domestic electric vehicle industry. The share of light vehicle production for EVs is expected to increase from 1.7 percent in 2017 to 10 percent in 2030, and the share for hybrid electric vehicles is projected to increase from 1 percent to 58 percent in 2030.

The transition to commercial electric vehicles is occurring at a slower rate, although tier 1 and major tier 2 cities – municipalities with the largest populations – are expected to change to 100 percent full-electric buses for urban area operation by 2020. Emission legislation and incentive policies will drive the switch of light-duty trucks in tier 1 and 2 cities to full electric, said Wang.

Sales of electric and hybrid commercial vehicles increased from 100,700 units in 2015 to 198,000 units in 2017, although heavy-duty trucks are expected to make the switch to electric or hybrid powertrains at a slower rate. In fact, sales of heavy electric commercial vehicles dropped from 23,000 units in 2015 to 14,000 units in 2017.

However, the electric vehicle industry will continue to be a pillar for the made-in-China 2025 strategy. We are in the process of designing a subsidy policy system after 2021 for innovative development of electric vehicles, said David Fang, vice-director of the new energy vehicle section of China Automotive Technology and Research Center.

We also plan to promote efficient companies in the EV industry. Tax incentives will continue, and new investments in conventional ICE vehicle manufacturing will no longer be approved, while the electric charging infrastructure will be inter-connected, he told conference attendees.

Electrification will lead to a diverse mix of powertrain systems, but many will still use an internal combustion engine, said Wang.

Demand for higher quality lubricants will increase to meet the needs of these diverse range of new engine hardware.

Chinas passenger cars lubricant market will see the majority share of low grade lubricants like API SM and below drop from about 55 percent of market share in 2017 to below 40 percent in 2022, he said.

Market share for SAE 5W-XX oils is expected to increase to more than 30 percent and slightly overtake SAE 10W-XX, while SAE 0W-XX will increase to more than 10 percent in 2022.

For commercial vehicles, the lubricant market share of CF-4 and below oils will slump from 50 percent in 2017 to 10 percent in 2022. According to the American Petroleum Institute, CF-4 is considered not suitable for use in most diesel-powered automotive engines built after 2009. Introduced in 1998, CH-4 will be the dominate grade, increasing from about a 40 percent share to more than 50 percent in the same period. Introduced in 2002, CI-4s share will almost double from 9 percent in 2017 to 20 percent in 2022.

China is a fragmented and complex lubricant market. According to Wang, the country has about 900 engine oil products and more than 180 different oil marketers. The top four oil marketer brands represented over 50 percent of total lubricant volume.

Related Topics

Regulations    Regulations Specs & Testing